|
|
Gondola Display Shelving
|
Two configurations
available, a single sided and a double sided. The
single sided configuration has shelving on one side of the
fixture. The single sided Gondolas are typically
positioned up against a wall and the wall provides support
for the back side of the fixture from tipping and
overturning. The double sided Gondola Shelving units
are placed in the center of the store creating aisles that
divide a store. The single sided and double sided
Gondola Shelving units are assembled with all the same
parts. This make the gondolas one of the most versital
store fixtures in use world wide. |
Gondola Shelving
Sizes
Gondola Shelving is
available in standard heights that start at 36" and run as
high as 96" and above either with the use of extensions or
by special order. Base depths start at 12" and run as
deep as 30". Upper shelves for gondolas start at 8"
and run as deep as 30" deep by special order. Standard
widths are 3' and 4' widths with a 24" and 30" width
available by special order. |
|
|
Gondola Shelving End Cap
The typical End Cap
Display is best configured using a Single Sided section that
will provide the most strength for the display of light to
heavy merchandise as the base shoes connect directly to the
basic upright. |
Standard and Optional Colors
Many standard and
optional colors to choose from: Sahara, Chocolate, Gray,
White, Black, and more.
|
|
|
Gondola Dividers
Shelf fences and dividers are
available for the most popular size shelves in lengths of 3
and 4 foot with heights of 3 and 6 inches, dividers are
available for most shelves to 30 inches long with heights of
3 and 6 inches. |
Gondola Upper Shelves
Available in 3' and 4' widths, 8" to
30" depths, two and 3 position in either a flat position, 15
degree or 30 degree down slope. |
|
|
Gondola Accessories
Choose from a large
selection of accessories available for Gondola Shelving. |
Gondola Shelving
Parts
All parts available for
Madix, Lozier, and Streeter Shelving. |
|
|
|
Gondola Shelving is
available in mostly two configurations. One configuration is a
single sided configuration designed to be placed up against a wall
for support on the back side of the gondola. The other is known as
the double sided configuration that would typically sit in the
middle of a sales floor dividing a store into sections. Gondolas
are available in 3' and 4' widths with a 24" width and a 30" wipth
available by special order. Gondola Shelving is constructed of all
the same peices making the single sided gondolas and the double
sided gondolas interchangable. Gondolas are available in ehghts
starting at 36" high and can be as high as 95" and beyond. We have
depths starting out at 8" deep and rn as deep as 30". |
|
 Smooth pencil polish edges on
top quality glass. Sturdy frame assembly has two position brackets
for flat or 15° downslope, ideal for gifts, jewelry and optics.
Weight capacity of 40 lb. for Glass Shelf installed on the Glass
Shelf Frame.
Overloading could cause sudden and
catastrophic failure, resulting in possible personal injury.
Madix Glass Shelving mounts onto
pre-existing Madix shelving mounting hardware |
click to enlarge |
Glass Shelf Frame and Bracket
For use with Glass Shelves. The sturdy
Glass Shelf Frame assembly has two position brackets for flat or 15
degree downslope, plus one center support bar. Ideal for gifts,
jewlery and optics. |
|
